Vinyl seat covers are the cornerstone of Northwest’s Work-Pro™ Series of seating protection aimed at work trucks in all industries.
For more than 25 years, they’ve set the benchmark for contractor grade seating fabrics that can handle a tough day on the job.
They have impressive specs to match – Cold Crack -25F / -32C, Wear Rating 30,000+, UV Protection and Flame-Oil-Mildew Resistant.
These are the types of features that can boast superior protection for a wide range of working environments.
You can add a bit of style by creating a 2-tone sport look that will deliver the same level of shielding for work and play.
NW Seat Covers come with a 2 year warranty for fit, workmanship and normal wear. We will replace any sections that have worn due to normal use, a material defect or a fitment problem, free of charge in 4 easy steps.
For more info, please visit our Warranty & Returns page.
PVC - Polyvinyl Chloride
Vinyl is so easy to keep clean because a warm damp cloth will clean up almost anything off the top surface.
Note: The reason why GM, Ford and Dodge continue to equip their vehicles with vinyl seat covers is because it's a versatile and low maintenance fabric. The Ram 1500 ST or Tradesman is outfitted with heavy duty vinyl 40/20/40 split bench. Vinyl seating is a standard feature for many base model trucks.
This may come as a surprise to some but, the vinyl / leather ratio of most factory leather interiors is about 3:2 or 60% vinyl and 40% leather. This includes vehicles like the Ford F-150 Lariat and Chevy Silverado LTZ. The corrected grain of the leather and vinyl is perfectly matched, making it very difficult to distinguish between the two fabrics. Automotive vinyl is very durable and resistant to grease and oil, making it a leader in seating protection.
To better provide you with the best instructions possible, we have included a series of video tutorials on our Youtube channel. You can also visit our Installation page and download our PDF Installation Guide.
In order to help us provide you with the best customer service we can, please e-mail us a digital picture of any problems you are having. This has shown to be an easy and valuable trouble shooting system for our customer service team. Also note that any returns due to a fitting problem must be preceded by a digital photo of the problem area. For any kind of technical issue, please contact our Customer Service at 1-888-821-1066.
If you don’t have a digital camera, please take your vehicle (with the covers on) back to the place of purchase so they can take a photo and/or possibly solve your fitting issue on the spot.
HEADREST AND LATCH HOLES
In many models, headrest holes, power holes and/or latch holes are not cut. This is due to past trouble with properly aligning the covers once the holes were cut. In these cases, it was deemed better to cut the holes once the cover is properly aligned and installed.
To make these holes, simply install the cover, then cut a small "X" cut over the area where the hole needs to be. Then, in the case of a latch hole, lift the cover up and slide the latch through the hole.
This process ensures that the holes are placed in correct spot every time!