Cool Sport Seat Covers Made for Heated and Ventilated Seats

Northwest Seat Covers' Cool Sport Seat Covers come with a 2 year warranty for fit, workmanship and normal wear. We will replace any sections that have worn due to normal use, a material defect or a fitment problem, free of charge in 4 easy steps.

For more info, please visit our Warranty & Returns page.

COOL SPORT FABRIC

Polyester with laminated polyurethane (PU) foam and scrim backing

Machine wash with an HE liquid detergent in warm water and on gentle cycle. The textile manufacturers recommend hang drying or fluff drying.

Note: Do not tumble dry on any warm temperature settings because the higher temperatures will reduce the moisture of the open cell foam walls, causing them to collapse and turn to foam dust over time. This is true for any foam backed set of covers.

Our OE Series of fabrics are made of a polyester knit construction. The fabric is designed to resist staining, but if you want to add additional protection, treat your seat covers with Scotchgard before installing them. This is the same type of treatment your factory seats receive before picking up your new vehicle from the dealership.

To better provide you with the best instructions possible, we have included a series of video tutorials on our Youtube channel. You can also visit our Installation page and download our Installation Guide.

In order to help us provide you with the best customer service we can, please e-mail us a picture of any problems you are having. Any returns due to a fitting problem must have a photo of the problem area. For any kind of technical issue, please contact our Customer Service at 1-888-821-1066.

You can also take your vehicle (with the covers on) back to the place of purchase so they can take a photo and/or possibly solve your fitting issue on the spot.

In many models, headrest holes, power holes and/or latch holes are not cut. This is due to past trouble with properly aligning the covers once the holes were cut. In these cases, it was deemed better to cut the holes once the cover is properly aligned and installed.

To make these holes, simply install the cover, then cut a small "X" over the area where the hole needs to be. Then, in the case of a latch hole, lift the cover up and slide the latch through the hole.

This process ensures that the holes are placed in the correct spot every time!