Neoprene Seat Covers Custom seat covers
- (8 reviews)
- $281.00 USD 15% Off per row !
- $281.00 USD
You must choose your vehicle first!
Neoprene seat covers are really comfortable to sit on and are waterproof on the inside.
Our genuine CBR quality neoprene is made with a 2.5 mm Neo-rubber material
It does a fantastic job of guarding against all liquid spills by keeping them off your original upholstery.
A simple water test will reveal a pretender; (By the genuine not a fake)
Neo-Supreme allows liquids to go right through the top surface to soak your seats with coffee, a soft drink and whatever else.
Northwest Seat Covers® are a statement that your standards for high quality are parallel with our commitment to providing you with the best products.
NW Seat Covers come with a 2 year warranty for fit, workmanship and normal wear. We will replace any sections that have worn due to normal use, a material defect or a fitment problem, free of charge in 4 easy steps.
For more info, please visit our Warranty & Returns page.
Polychloroprene with laminated PU foam, polyester scrim backing and a nylon top surface
Fill bath tub with warm temperature water, add a cap of wet suit cleaner or clear liquid dish and let soak for about 30 minutes. Then gently rub any area that is stained just to loosen residue caught in the knitted nylon fabric and let it soak for another 15-20 minutes. Hang dry in a shady area.
Note: The nylon top surface will resist staining with most spills and neoprene seat covers guarantee that liquids won’t get through to your original cloth. All liquids can be easily wiped up with a cloth. If condiments like ketchup or mustard drops onto the surface of the fabric simply dab it with a damp cloth and lift it off the surface. The cleaner we recommend is an HE liquid detergent because it produces a low amount of suds. The HE liquid detergent will do a good job of breaking down any residue from the stain.
To better provide you with the best instructions possible, we have included a series of video tutorials on our Youtube channel. You can also visit our Installation page and download our PDF Installation Guide.
In order to help us provide you with the best customer service we can, please e-mail us a digital picture of any problems you are having. This has shown to be an easy and valuable trouble shooting system for our customer service team. Also note that any returns due to a fitting problem must be preceded by a digital photo of the problem area. For any kind of technical issue, please contact our Customer Service at 1-888-821-1066.
If you don’t have a digital camera, please take your vehicle (with the covers on) back to the place of purchase so they can take a photo and/or possibly solve your fitting issue on the spot.
HEADREST AND LATCH HOLES
In many models, headrest holes, power holes and/or latch holes are not cut. This is due to past trouble with properly aligning the covers once the holes were cut. In these cases, it was deemed better to cut the holes once the cover is properly aligned and installed.
To make these holes, simply install the cover, then cut a small "X" cut over the area where the hole needs to be. Then, in the case of a latch hole, lift the cover up and slide the latch through the hole.
This process ensures that the holes are placed in correct spot every time!